Ibm intellistation z pro 6223 user manual

Set the Power switch to the Off position. Disconnect the ac power cable from the rear of the Loosen the screw 1 … Unit Reference Codes This unit reference code table is to be used by a service representative.

Subtopics 3. Loosen the screw 1 and place the control … The control panel will display a disk drive configuration with the slot number of the drive to be reset indicated by a solid block. Install the replacement disk drive data cable: a. Disk drive connector 1 and 2. Install the front cover see "Front Cover Removal or Installa … Go to the "Unit Reference Code Table" in topic 3.

The "Unit Reference Code Table" is arranged in reference-code sequence, with numeric characters appearing before alphanumeric characters. If a problem recovery procedure is indicated with a unit reference … Then return to step 21 in this procedure. End of procedure. Check the external signal cable connections between the failing and the adapter card. Are all the signal cable connections tight and is the terminating plug tightly connected at the end of the cable path?

Then, return to step From your computer system, run the diagnostic test programs … Page 14 For example, if a caution statement begins with a number 1, translations for that caution statement appear in the IBM Safety Information document under statement Be sure to read all caution and danger statements in this documentation before performing the instructions. Read any additional safety information that comes with your computer or optional device before you install the device.

Page Chapter 1. Each statement is numbered for reference to the corresponding statement in the Safety Information document. Page Features And Specifications Features and specifications The following table provides a summary of the features and specifications of your computer. Depending on your model, some features might not be available, or some specifications might not apply. Table 1. When you register your computer with IBM, information is entered into a database so that you can be contacted in case of a recall or other problems.

Scroll down and click a product name to get more details about the product. To download a product, click Systems Management Downloads in the Download category. Reliability, availability, and serviceability features Three important computer design features are reliability, availability, and serviceability RAS. Page Chapter 2. Page Turning On The Computer 1.

Turn on all external devices, such as the monitor, before turning on the computer. The power-on LED on the front of the computer is lit when the computer is on and while it is being turned on. To use these features, press the applicable function key or keys quickly.

The messages appear for only a short time. Page Running The Operating-System Setup Program Before installing any operating system, make sure that you obtain the latest updates. The IBM Enhanced Diagnostics diskette is a self-starting diagnostics diskette that you can use to test hardware components in your computer.

Page Using Video Features The downloaded file is self-extracting and is copied to the diskette. When the copy is completed, store the diskette in a safe place.

Page Using Audio Features Microphone connectors are on both the front and the rear of the computer. Using security features To deter unauthorized use of your computer, you can use anti-intrusion features and other security features that are provided with the computer. This built-in protection checks for viruses in the boot record only. You can use IBM Director Agent to view detailed information about your computer hardware and software, set up alerts, monitor a variety of system resources, and manage your asset security.

Shutting down the operating system Note: When you connect the power cord to the computer and an ac power source, the power-supply fan will run and continue to run when the computer is in standby mode to provide cooling to the power supply. Page 34 You can press and hold the power-control button for more than 4 seconds to cause an immediate shutdown of the computer. You can use this feature to turn off the computer if the operating system stops functioning. Page Chapter 3.

Page 37 installed, the computer will have no SCSI capability. If you disable the integrated Ethernet controller and no Ethernet adapter is installed, the computer will have no Ethernet capability.

You can use any combination of up to seven characters A—Z, a—z, and 0—9 for the password. RAID level If the ServeRAID Manager program detects an unconfigured controller and ready drives, the program automatically starts the Configuration wizard.

To display a list of available actions for an object, click the object and click Actions. Page Chapter 4. Installing Options This chapter provides instructions for installing or replacing hardware options in your computer. Installation guidelines Page Installing Options In Your Computer Note: To remove the side cover and install options, you might find it easier to lay the computer on its side.

Major components of your computer The following illustration shows the major components in the Z Pro Type computer. EMC shields Page System-Board Option Connectors System-board option connectors The following illustration shows the system-board connectors for user-installable options. Installing options Attention: For proper cooling and airflow, replace the side cover before turning on the computer.

Operating the computer with the cover removed might damage computer components. Page Removing The Bezel Removing the bezel When working with some devices, such as additional optical drives, you must first remove the bezel to access the device. To install or remove options, you might find it easier to lay the computer on its side.

Complete the following steps to remove the bezel: 1. Complete the following steps to install an adapter in your computer: 1. Page 55 6. Remove the expansion-slot cover. From the rear of the computer, press on the slot cover. Grasp it and pull it out of the expansion slot.

Store it in a safe place for future use. Attention: Expansion-slot covers must be installed on all empty slots. This maintains the electronic emissions standards of the computer and ensures proper ventilation of computer components. Page 56 With a SCSI adapter installed, you can configure the internal hard disk drives into disk arrays. You can also cable a SCSI adapter to external hard disk drives.

Bay Installing a drive in bay 2 or 3 Complete the following steps to install a drive in bay 2 or 3: 1. Page 60 5. Use a screwdriver to pry the filler panel and EMC shield away from the computer. EMC shield Filler panel Note: If you are installing a drive that contains a laser, observe the following safety precaution.

Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. Page 62 If you are installing a 5. If you are installing a 3.

All rights reserved. Chapter IBM and third party software applications. TotalStorage DS disk system. System Storage DS disk system. Additional fibre channel components.

External storage configuration examples. Appendix B. External tape and tape library attributes. Appendix C. UPS runtime estimate minutes. Appendix F. Appendix G. Feature code is the nonmenclature used to specify components of configurable System x products used in US and Canada Web configurators. Dual-head Graphics.

Resolution Supported each head. Monitor Connector Type. Video Adapter. Signal Width. Available only as standard equipment in an IntelliStation workstation model or configured to order via CTO. See IntelliStation system At-A-Glance sections to identify models that include these standard video adapters. Requires more space than the planar provides between slots, preventing the installation of an optional PCI adapter in the adjacent PCI slot.

PCle AdapterVideo. Model numbers provided are worldwide generally available variant GAV model numbers which are not orderable as listed and need to be modified by country. The U. GAV model numbers use the following nomenclature: xxU. For example, the U. Substitute the last character with a country-specific designator. To achieve maximum memory capacities, standard memory replacement may be required with the currently supported memory DIMMs.

Slot 1 will not be available when using the 3Dlabs Wildcat Realizm graphics adapter. Memory DIMMs must be installed in pairs. Each pair must be identical.

Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and Tape Library Attributes appendices, respectively.

A keyboard and mouse is also provided. A diskette drive is not provided. AdapterVideo PCle. InternalHDD Interface. Model numbers provided are worldwide generally available variant GAV model number which are not orderable as listed and need to be modified by country. Geographies follow the same pattern. Substitute the last character with the country-specific designator. Not available from IBM after this date.

Business Partner Inventory may be available.